Siemens SINAMICS G120 Getting Started - Page 36

Browse online or download pdf Getting Started for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 46 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Manual (42 pages), Getting Started (50 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Application Description (50 pages), Compact Operating Instructions (2 pages), Manual (31 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page

Commissioning

4.2 Commissioning with STARTER

4.2.3

Configuring a drive

The basic commissioning of the inverter comprises the following steps:

1. Starting basic commissioning

2. Configuring a drive

3. Loading the configured data into the drive

Starting basic commissioning

Procedure

To start the basic commissioning, proceed as follows:

1. In STARTER select the drive you wish to commission.

2. Start the wizard for the device configuration:

You have started the basic commissioning.

Configuring a drive

Procedure

To configure the drive, proceed as follows:

Select the required

function modules

for your

application.

Select the control

mode.

Converters with CU250S-2 Control Units

Getting Started, 10/2013, FW V4.6, A5E32899990B AA