Siemens SINAMICS G120 Getting Started - Page 21

Browse online or download pdf Getting Started for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 50 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Manual (42 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Application Description (50 pages), Compact Operating Instructions (2 pages), Manual (31 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page
Siemens SINAMICS G120 Getting Started
3.3.1.2

Terminal strips of the CU230P-2

*) The following applies to systems complying with UL: A maximum of 3 A 30 V DC or 2 A 250 V AC may be connected via
terminals 18 / 20 (DO 0 NC) and 23 / 25 (DO 2 NC).
①
The analog input is supplied from an external 10 V voltage.
②
The analog input is supplied from the internal 10 V voltage.
③
Wiring when using the internal power supplies. Connecting a contact switching to P.
④
Wiring when using external power supplies. Connecting a contact switching to P.
⑤
Wiring when using the internal power supplies. Connecting a contact switching to M.
⑥
Wiring when using external power supplies. Connecting a contact switching to M.
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 04/2014, A5E32885834B AB
Installing
3.3 Installing Control Unit
21