Siemens SINAMICS G120 Application Description - Page 2

Browse online or download pdf Application Description for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 50 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Manual (42 pages), Getting Started (50 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Compact Operating Instructions (2 pages), Manual (31 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page

Warranty and Liability

The Application Examples are not binding and do not claim to be complete

Note

regarding the circuits shown, equipping and any eventuality. The Application

Examples do not represent customer-specific solutions. They are only intended

to provide support for typical applications. You are responsible for ensuring that

the described products are used correctly. These Application Examples do not

relieve you of the responsibility to use safe practices in application, installation,

operation and maintenance. When using these Application Examples, you

recognize that we cannot be made liable for any damage/claims beyond the

liability clause described. We reserve the right to make changes to these

Application Examples at any time without prior notice.

If there are any deviations between the recommendations provided in these

Application Examples and other Siemens publications – e.g. Catalogs – the

contents of the other documents have priority.

We do not accept any liability for the information contained in this document.

Any claims against us – based on whatever legal reason – resulting from the use of

the examples, information, programs, engineering and performance data etc.,

described in this Application Example shall be excluded. Such an exclusion shall

not apply in the case of mandatory liability, e.g. under the German Product Liability

Act ("Produkthaftungsgesetz"), in case of intent, gross negligence, or injury of life,

body or health, guarantee for the quality of a product, fraudulent concealment of a

deficiency or breach of a condition which goes to the root of the contract

("wesentliche Vertragspflichten"). The damages for a breach of a substantial

contractual obligation are, however, limited to the foreseeable damage, typical for

the type of contract, except in the event of intent or gross negligence or injury to

life, body or health. The above provisions do not imply a change of the burden of

proof to your detriment.

Any form of duplication or distribution of these Application Examples or excerpts

hereof is prohibited without the expressed consent of Siemens Industry Sector.

Caution

The functions and solutions described in this entry predominantly confine

themselves to the realization of the automation task. Please also take into account

that corresponding protective measures have to be taken in the context of

Industrial Security when connecting your equipment to other parts of the plant, the

enterprise network or the Internet. For more information, please refer to Entry ID

50203404.

http://support.automation.siemens.com/WW/view/en/50203404

Siemens Industry Online Support

This entry is taken from Siemens Industry Online Support. The following link takes

you directly to the download page of this document:

http://support.automation.siemens.com/WW/view/en/78788716

SINAMICS G120 as a Speed Axis on the S7-1500

V1.0a, Entry ID: 78788716