Siemens SINAMICS G120 Application Description - Page 32

Browse online or download pdf Application Description for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 50 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Manual (42 pages), Getting Started (50 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Compact Operating Instructions (2 pages), Manual (31 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page
Siemens SINAMICS G120 Application Description
4 Configuration and Project Engineering
4.3 Safe Torque Off (STO)
with Safety Integrated
No.
Action
5.
Test stop
On demand you can
interconnect...
1. the time for the test stops.
2. the "Test of the shutdown
paths required" output.
However, this is not
necessary in this application.
6.
F-DI configuration
If necessary, you can change
the constants for discrepancy
time and input filter for the
fail-safe input.
However, this is not
necessary in this application.
7.
Exit the safety commissioning
mode by pressing the
button.
8.
Save the changed safety
parameters in ROM.
SINAMICS G120 as a Speed Axis on the S7-1500
V1.0a, Entry ID: 78788716
Picture
2
1
32