Siemens SINAMICS G120 Manual - Page 18

Browse online or download pdf Manual for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 31 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Manual (42 pages), Getting Started (50 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Application Description (50 pages), Compact Operating Instructions (2 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page
Siemens SINAMICS G120 Manual
4 Configuration and Settings
No.
Action
4.
The Commissioning Wizard can be
found in the drive folder under
"Commissioning".
5.
Follow the Commissioning Wizard.
Useful support can be found in the
TIA Portal online help.
It is particularly important to
configure standard telegram 1 to
control the communication.
6.
As a last step of the commissioning
wizard, you have to save the drive
settings. To do so, check the "RAM
data to EEPROM" checkbox and
finish the wizard.
7.
Then disconnect the online
connection to the drive and load the
configuration stored in the drive into
the offline project.
8.
Save the TIA Portal project.
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727,
V1.0,
06/2017
Remark
-
18