Siemens SINAMICS G120 Manual - Page 4

Browse online or download pdf Manual for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 31 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Manual (42 pages), Getting Started (50 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Application Description (50 pages), Compact Operating Instructions (2 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page

1 Introduction

Introduction

1.1

The SIMATIC S7-1200 can be operated as a PROFINET controller. For this, the

PROFINET-capable SINAMICS G120 drive can be used as PROFINET device and

be controlled by SIMATIC S7-1200.

This application example specifies a setpoint speed for a SINAMICS G120 drive.

The drive is controlled using the control word.

Overview of the application example

The following figure provides an overview of the application example.

Figure 1-1: Overview

SINAMICS G120

1.2

Table 1-1: Requirements of the application example

Requirement

Access to process data

Monitoring the

communication

Safety function of the

SINAMICS G120

Drehzahlachse mit SINA_SPEED

Entry-ID: 109485727,

V1.0,

SIMATIC S7-1200

The control word switches the SINAMICS G120 drive on or off

and specifies the setpoint speed value.

Pending faults at the drive are displayed and acknowledged.

The communication connection between the controller and the

drive are monitored for interruptions.

The SINAMICS G120 will have the option of performing a fail-

safe shutdown (STO).

06/2017

SIMATIC HMI

PROFINET IE

Explanation