Siemens ULTRAMAT 6F Operating Instructions Manual - Page 34
Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens ULTRAMAT 6F. Siemens ULTRAMAT 6F 49 pages. Gas analyzer for the determination of ir-absorbing gases
Also for Siemens ULTRAMAT 6F: Additional Equipment Manual (20 pages), Safety Manual (24 pages)
Print Page
6.1.2
Safety information for analyzers used in hazardous areas
DANGER
Explosion hazard
Never open, service or repair the analyzer in an area in which a potentially explosive atmosphere may be present.
WARNING
Impermissible accessories and spare parts
Danger of explosion in areas subject to explosion hazard.
Only use original accessories or original spare parts.
•
Observe all relevant installation and safety instructions described in the instructions for the device or enclosed with the
•
accessory or spare part.
WARNING
Commissioning and operation with pending error
If an error message appears, correct operation in the process is no longer guaranteed.
Check the gravity of the error
•
Correct the error
•
If the device is faulty:
•
–
Take the device out of operation.
–
Prevent renewed commissioning.
WARNING
Improper connection after maintenance work
Danger of explosion in hazardous areas.
The analyzer must be properly connected after maintenance work.
•
Close the device after maintenance work
•
CAUTION
Hot parts in the device
Temperatures that can burn unprotected skin may be present for some time after the device has been switched off.
Observe the waiting time specified in Technical specifications for operation in hazardous areas (Page 42) or on the
•
device before starting with maintenance work.
34
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
A5E45779389002-01, 09/2018