Epson 830p - PowerLite XGA LCD Projector Function Manual - Page 2

Browse online or download pdf Function Manual for Projector Epson 830p - PowerLite XGA LCD Projector. Epson 830p - PowerLite XGA LCD Projector 5 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Also for Epson 830p - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Operation Manual (47 pages), Quick Setup (2 pages), Supplementary Manual (1 pages), User Manual (15 pages), Brochure & Specs (4 pages), Installation Manual (19 pages), Technical Brief (7 pages), Product Support Bulletin (25 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Specification Sheet (4 pages)

Print Page
Epson 830p - PowerLite XGA LCD Projector Function Manual
2. Select
Settings
3. Select
Register at startup
start automatically when your computer starts up.
4. Enter the IP address for the projector in the Projector IP Address field.
You cannot connect to the projector without entering a Projector IP
Address. See your projector's documentation for information on
obtaining your projector's IP address.
5. Enter the Web Control password or the password that was set using the
Epson EMP Monitor Utility in the Monitor Password field. If you
didn't set a password, don't enter anything.
6. Uncheck the boxes for the buttons that you do not want to display in
Advanced and Simple Mode.
7. Click
to save and close the settings window or
OK
your changes and close the settings window.
from the Tool menu. You see a window like this:
if you want the Projector Control software to
to discard
Cancel
Connecting to the Projector
2