Siemens FX-C Repair Instructions - Page 18
Browse online or download pdf Repair Instructions for Washer Siemens FX-C. Siemens FX-C 34 pages.
6
REPAIR
6.1
Diagnosis / Repair aids
6.1.1
General
Before repairing or testing the appliance, always start the customer-
service test programme.
6.1.2
Test prod
Test probe mat. no.: 340730 (remove the components from the
module before measuring the resistance)
6.1.3
Protective gloves:
Material no.:
size 9 = 340728
size 10 = 340729
6.1.4
Screwdriver
Screwdriver of 85 mm to disassembly the screw of the front panel.
mat. no 460621.
209_58300000115677_ara_en_f.doc – 26.03.08
6.1.5
Unbalanced load detection
The termination of the spin cycle by the unbalanced load scan can be
reset with the aid of a water-filled thermal bottle. The thermal bottle
with contents must weight at least 800 g.
6.1.6
Plastic side cutters
Plastic side cutters mat. no.: 340701 for repairs to the outer tub.
6.1.7
Drill bit
Drill bit (13.2 mm) mat. no.: 340700 for repairs to the friction dampers.
Seite 18 von 34