Siemens FX-C Instrukcje naprawy - Strona 18

Przeglądaj online lub pobierz pdf Instrukcje naprawy dla Spryskiwacz Siemens FX-C. Siemens FX-C 34 stron.

REPAIR

6.1

6.1.1

General

Before repairing or testing the appliance, always start the customer-

service test programme.

6.1.2

Test prod

Test probe mat. no.: 340730 (remove the components from the

module before measuring the resistance)

6.1.3

Protective gloves:

Material no.:

size 9 = 340728

size 10 = 340729

6.1.4

Screwdriver

Screwdriver of 85 mm to disassembly the screw of the front panel.

mat. no 460621.

209_58300000115677_ara_en_f.doc – 26.03.08

6.1.5

Unbalanced load detection

The termination of the spin cycle by the unbalanced load scan can be

reset with the aid of a water-filled thermal bottle. The thermal bottle

with contents must weight at least 800 g.

6.1.6

Plastic side cutters

Plastic side cutters mat. no.: 340701 for repairs to the outer tub.

6.1.7

Drill bit

Drill bit (13.2 mm) mat. no.: 340700 for repairs to the friction dampers.

Seite 18 von 34