Siemens WM**U series Installation & Operation Manual - Page 33
Browse online or download pdf Installation & Operation Manual for Washer Siemens WM**U series. Siemens WM**U series 40 pages.
Print Page
5
Positioning and
connecting
Standard accessories
P o s i t i o n i n g a n d c o n n e c t i n g
Check the appliance for transport
Note:
damage. Never use a damaged
appliance. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
Customer Service.
( Mains lead
0 Bag:
Installation and operating
■
instructions
Customer Service location
■
directory*
Warranty*
■
Supplement*
■
Cover caps for openings after
■
the transport braces have
been removed
Positioning and connecting
8 Water inlet hose on aquaStop
models
@ Water outlet hose
H Elbow for securing the water
outlet hose*
P Cold water inlet hose on
Standard/Aqua-Secure models
*
Depending on the model
In addition, a hose clamp ( 24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water outlet hose to a siphon.
Useful tool
Spirit level for aligning
■
Wrench with:
■
– WAF13 for loosening the
transport braces and
– WAF17 for aligning the appliance
feet
Safety instructions
:
Warning
Risk of injury!
The appliance is very heavy.
■
Be careful when lifting/transporting
the appliance.
When the appliance is lifted by its
■
protruding parts (e.g. the appliance
door), the components may break
off and cause injuries.
Do not lift the appliance by
protruding parts.
If the hose and mains cables are not
■
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the appliance in areas
exposed to frost or outdoors.
en
33