Siemens EH Series Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Hob Siemens EH Series. Siemens EH Series 16 pages.
Also for Siemens EH Series: Instruction Manual (34 pages), Instructions For Installation And Use Manual (20 pages), Instruction Manual (24 pages), User Manual (20 pages)

Print Page

1. Table of Contents

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Changing or cancelling the time

Press the

symbol several times until the required

indicator lights up. Change the cooking time in the

programming panel, or set to

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

appears in the time program function display for 10 seconds.

The

indicator lights up. Pressing the

indicators and stops the signal.

Notes

If a cooking time has been programmed in several zones, it

■

can be set to display all time values. To do this, press the

symbol several times until the

hotplate lights up.

Cooking times of up to 99 minutes can be programmed.

■

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

symbol. A signal sounds. The control panel is

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. On the hotplate display,

flash alternately.

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator

Function

Childproof lock

™‚

‹

Deactivated.*

‚

Activated.

Audible signals

™ƒ

‹

Confirmation and error signals deactivated.

‚

Only confirmation signal deactivated.

All signals activated.*

Automatic programming of cooking time

™†

‹

Switched off.*

‚

ŠŠ

Automatic shut-off time.

*Factory settings

‹‹

symbol turns off the

indicator for the required

and

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

Press the

up.

lights up in the time program function display.

‹‹

Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

symbol several times until the

up. Change the cooking time in the programming panel, or set

‹‹

Once the time has elapsed

A warning beep sounds. In the time program function display

‹‹

is shown, and the

the indicators turn off.

Pressing the

beep.

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

‰

symbol several times until the

indicator comes on. After 10 seconds

symbol turns off the indicators and stops the

indicator lights