Cisco 8841 User Manual - Page 7

Browse online or download pdf User Manual for IP Phone Cisco 8841. Cisco 8841 28 pages. Mpp phones
Also for Cisco 8841: Release Notes (24 pages), User Manual (16 pages), Quick Reference Manual (7 pages), Features (16 pages), Quick Start Up Manual (2 pages), User Manual (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Quick Manual (2 pages), Quick Reference Manual (6 pages), User Manual (24 pages), Firmware Migration Master Manual (31 pages), User Manual (30 pages), User Manual (29 pages), Manual (44 pages), Quick Start Manual (2 pages), Short Manual (2 pages), Quick Start Manual (2 pages), Reconfiguration Manual (2 pages), Quick Start Manual (6 pages), Manual (22 pages), Getting Started (2 pages), Quick Start Manual (2 pages), Manual (48 pages), User Manual (40 pages), Quick Start (2 pages)

Print Page

Your Phone

Procedure

Step 1

Remove the handset from the cradle and pull the plastic tab from the handset rest.

Step 2

Rotate the tab 180 degrees.

Step 3

Hold the tab between two fingers, with the corner notches facing you.

Step 4

Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from

the top of the rotated tab.

Step 5

Return the handset to the handset rest.

Change the Viewing Angle of Your Phone

You can change the angle of the phone to eliminate glare on the screen. If your phone has a video camera,

you can change the angle to improve the camera view.

Procedure

Step 1

Hold the receiver in the cradle with one hand.

Step 2

Move the footstand with the other hand to change the angle.

Step 3

(Optional) Adjust the footstand on the key expansion module and ensure that the phone and key expansion

module are stable.

Step 4

(Optional) Press Self-view to check the camera angle.

Connect to the Network

You need to connect the phone to the network.

• Wired network connection—The phone is plugged into the network with an Ethernet cable.

• Wireless connection—The Cisco IP Phone 8861 and 8865 can connect to a Wireless Access Point using

• Virtual Private Network (VPN)—After the phone is connected to the network, it is set up to automatically

Mobile and Remote Access Through Expressway—If your administrator sets up Mobile and Remote Access

Through Expressway and you connect your phone to the network, it connects to the Expressway server

automatically.

Onboard Your Phone with Activation Code

After your phone boots up, you will see a welcome screen where you can enter the activation code. If you

don't have an activation code, contact your administrator.

Wi-Fi.

connect into a protected network.

Change the Viewing Angle of Your Phone

Your Phone