Cisco 8841 User Manual - Page 9

Browse online or download pdf User Manual for IP Phone Cisco 8841. Cisco 8841 30 pages. Mpp phones
Also for Cisco 8841: Release Notes (24 pages), User Manual (16 pages), Quick Reference Manual (7 pages), Features (16 pages), Quick Start Up Manual (2 pages), User Manual (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Quick Manual (2 pages), Quick Reference Manual (6 pages), User Manual (24 pages), User Manual (28 pages), Firmware Migration Master Manual (31 pages), User Manual (29 pages), Manual (44 pages), Quick Start Manual (2 pages), Short Manual (2 pages), Quick Start Manual (2 pages), Reconfiguration Manual (2 pages), Quick Start Manual (6 pages), Manual (22 pages), Getting Started (2 pages), Quick Start Manual (2 pages), Manual (48 pages), User Manual (40 pages), Quick Start (2 pages)

Print Page

Procedure

Step 1 Press Applications

Step 2 Select Status > Product Information.

You can view the following information:

Product name - Model number of the Cisco IP Phone.

Serial number - Serial number of the Cisco IP Phone.

MAC address - Hardware address of the Cisco IP Phone.

Software version - Version number of the Cisco IP Phone firmware.

Hardware version - Version number of the Cisco IP Phone hardware.

Certificate - Status of the client certificate, which authenticates the Cisco IP Phone for use

in the ITSP

in the phone.

Customization - For an RC unit, this field indicates whether the unit has been customized or

not.

already retrieved its

state as Acquired.

Step 3 Press Exit to return to the Applications screen.

View the Network Status

Procedure

Step 1 Press Applications

Step 2 Select Status > Network Status.

You can view the following information:

• Network type - Indicates the type of Local Area Network (LAN) connection that the phone

uses.

• Network status - Indicates if the phone is connected to a network.

• IPv4 - IP address of the phone. You can see information on IP address, VLAN ID,

Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2

of the phone.

• IPv6 - IP address of the phone. You can see information on IP address, VLAN ID,

Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2

of the phone.

• MAC address - Unique Media Access Control (MAC) address of the phone.

• Host name - Displays the current host name assigned to the phone.

• Domain - Displays the network domain name of the phone. Default: cisco.com

• Switch port link - Status of the switch port.

• Switch port config - Indicates speed and duplex of the network port.

• PC port config - Indicates speed and duplex of the PC port.

• PC port link - Indicates speed and duplex of the PC port.

View the Phone Status

Procedure

Step 1 Press Applications

9 |

P a g e

network. This field indicates if the client certificate is properly installed

Pending indicates a new RC unit that is ready for provisioning. If the unit has

customized profile, this field displays the Customization

Cisco IP Phone 8800 Series User Guide