Cisco Small Business Pro SPA 509G User Manual - Page 16

Browse online or download pdf User Manual for IP Phone Cisco Small Business Pro SPA 509G. Cisco Small Business Pro SPA 509G 18 pages. Cisco small business spa300 / spa500 series
Also for Cisco Small Business Pro SPA 509G: Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (7 pages), Quick User Manual (2 pages), Quick Start Manual (14 pages), Configuration Manual (12 pages), Configuration Manual (12 pages), Reference Manual (6 pages), User Manual (12 pages), How To Configure (4 pages), Getting Started (5 pages), Quick Reference Card (2 pages), Quick Start Manual (7 pages)

Print Page

Cisco SPA Phones User Guide

- Example for Hostname: tftp://voip.bicomsystems.com/$MA.cfg

- Example for IP Address: tftp://192.168.1.10/$MA.cfg

Make sure you replace Hostname or IP Address from this example with your

PBXware Hostname or IP address.

Click on Submit All Changes and wait 35 seconds. The phone may reboot.

Reboot the phone and wait for the phone to reboot once again.

Auto provisioning process will start during phone reboot process, phone will pickup

appropriate configuration file from PBXware. If everything is done as above

described, you should have successfully registered your phone to PBXware. Dial

*123 to verify registration.

4.2.3.2.2 HTTP & HTTPS

This chapter describes how to use HTTP & HTTPS protocols in order to register Cisco

SPA phone.

Contact your PBXware administrator. Bicom Sy stem s can prov ide serv ice to set up this

for y ou.

In the Profile Rule field enter http:// or https:// followed by Hostname or IP

Address, followed then by /tftp/

- Example for Hostname using HTTP: http://voip.bicomsystems.com/tftp/

- Example for Hostname using HTTPS: https://voip.bicomsystems.com/

tftp/

- Example for IP Address using HTTP: http://192.168.1.10/tftp/

- Example for IP Address USING HTTPS: https://192.168.1.10/tftp/