Cisco Small Business Pro SPA 509G Manual do utilizador - Página 16

Procurar online ou descarregar pdf Manual do utilizador para Telefone IP Cisco Small Business Pro SPA 509G. Cisco Small Business Pro SPA 509G 18 páginas. Cisco small business spa300 / spa500 series
Também para Cisco Small Business Pro SPA 509G: Manual de início rápido (2 páginas), Manual de início rápido (2 páginas), Manual de início rápido (7 páginas), Manual rápido do utilizador (2 páginas), Manual de início rápido (14 páginas), Manual de configuração (12 páginas), Manual de configuração (12 páginas), Manual de referência (6 páginas), Manual do utilizador (12 páginas), Como configurar (4 páginas), Começar a trabalhar (5 páginas), Cartão de referência rápida (2 páginas), Manual de início rápido (7 páginas)

Imprimir página
Cisco Small Business Pro SPA 509G Manual do utilizador
14
Cisco SPA Phones User Guide
- Example for Hostname: tftp://voip.bicomsystems.com/$MA.cfg
- Example for IP Address: tftp://192.168.1.10/$MA.cfg
Make sure you replace Hostname or IP Address from this example with your
PBXware Hostname or IP address.
Click on Submit All Changes and wait 35 seconds. The phone may reboot.
Reboot the phone and wait for the phone to reboot once again.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial
*123 to verify registration.
4.2.3.2.2 HTTP & HTTPS
This chapter describes how to use HTTP & HTTPS protocols in order to register Cisco
SPA phone.
Contact your PBXware administrator. Bicom Sy stem s can prov ide serv ice to set up this
for y ou.
In the Profile Rule field enter http:// or https:// followed by Hostname or IP
Address, followed then by /tftp/
- Example for Hostname using HTTP: http://voip.bicomsystems.com/tftp/
- Example for Hostname using HTTPS: https://voip.bicomsystems.com/
tftp/
- Example for IP Address using HTTP: http://192.168.1.10/tftp/
- Example for IP Address USING HTTPS: https://192.168.1.10/tftp/
Make sure you replace Hostname or IP Address from this example with your
PBXware Hostname or IP address.
Click on Submit All Changes and wait 35 seconds. The phone may reboot.
Reboot the phone and wait for the phone to reboot once again.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above
N O TE
Y our PBX ware needs to be configured correctly for this to work.
© 2003 - 2012 Bicom Systems