Ricoh SP 203SF Software Installation Manual - Page 13
Browse online or download pdf Software Installation Manual for All in One Printer Ricoh SP 203SF. Ricoh SP 203SF 21 pages. Software installation guide
Also for Ricoh SP 203SF: Quick Installation Manual (2 pages)
Print Page
3. Changing the IP Address Settings
Changing the IP Address Settings Using the Control Panel (SP
202SN/203SFN/204SFN/204SN only)
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
5.
Make sure [DHCP Activated] is set to [On].
After a setting has been changed, the machine automatically reboots itself.
Configuring the Machine's IPv4 Address Manually
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
13