Ricoh SP 203SF Software Installation Manual - Page 14
Browse online or download pdf Software Installation Manual for All in One Printer Ricoh SP 203SF. Ricoh SP 203SF 21 pages. Software installation guide
Also for Ricoh SP 203SF: Quick Installation Manual (2 pages)
Print Page
5.
Press the [ ] or [ ] key to select [Off], and then press the [OK] key.
If you change this setting, the machine automatically reboots itself before the procedure can
be completed. When this happens, wait for the reboot to finish, repeat steps 1 to 3, and then
proceed to the next step.
6.
Press the [ ] or [ ] key to select [IP Address] , and then press the [OK] key.
7.
Enter the machine's IPv4 address using the number keys.
Press the [ ] key to move between fields.
8.
Enter the values in all fields, and then press the [OK] key.
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
After a setting has been changed, the machine automatically reboots itself.
•
For details about configuring the IPv6 address, see the User Guide .
•
You cannot configure the network settings while the machine is operating (printing, receiving a
fax, etc.). Correspondingly, the machine cannot receive print jobs and faxes while the network
settings are being configured (after clicking [Network Settings]).
14