Ricoh SP 203SF Yazılım Kurulum Kılavuzu - Sayfa 14

Hepsi Bir Arada Yazıcı Ricoh SP 203SF için çevrimiçi göz atın veya pdf Yazılım Kurulum Kılavuzu indirin. Ricoh SP 203SF 21 sayfaları. Software installation guide
Ayrıca Ricoh SP 203SF için: Hızlı Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Press the [ ] or [ ] key to select [Off], and then press the [OK] key.

If you change this setting, the machine automatically reboots itself before the procedure can

be completed. When this happens, wait for the reboot to finish, repeat steps 1 to 3, and then

proceed to the next step.

Press the [ ] or [ ] key to select [IP Address] , and then press the [OK] key.

Enter the machine's IPv4 address using the number keys.

Press the [ ] key to move between fields.

Enter the values in all fields, and then press the [OK] key.

Specify the subnet mask and default gateway address as required in accordance with the

network environment.

After a setting has been changed, the machine automatically reboots itself.

•

For details about configuring the IPv6 address, see the User Guide .

•

You cannot configure the network settings while the machine is operating (printing, receiving a

fax, etc.). Correspondingly, the machine cannot receive print jobs and faxes while the network

settings are being configured (after clicking [Network Settings]).