Ricoh SP 203SF Panduan Instalasi Perangkat Lunak - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Instalasi Perangkat Lunak untuk Semua dalam Satu Printer Ricoh SP 203SF. Ricoh SP 203SF 21 halaman. Software installation guide
Juga untuk Ricoh SP 203SF: Panduan Instalasi Cepat (2 halaman)
Halaman Cetak
5.
Press the [ ] or [ ] key to select [Off], and then press the [OK] key.
If you change this setting, the machine automatically reboots itself before the procedure can
be completed. When this happens, wait for the reboot to finish, repeat steps 1 to 3, and then
proceed to the next step.
6.
Press the [ ] or [ ] key to select [IP Address] , and then press the [OK] key.
7.
Enter the machine's IPv4 address using the number keys.
Press the [ ] key to move between fields.
8.
Enter the values in all fields, and then press the [OK] key.
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
After a setting has been changed, the machine automatically reboots itself.
•
For details about configuring the IPv6 address, see the User Guide .
•
You cannot configure the network settings while the machine is operating (printing, receiving a
fax, etc.). Correspondingly, the machine cannot receive print jobs and faxes while the network
settings are being configured (after clicking [Network Settings]).
14