Cisco SPA232D Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for IP Phone Cisco SPA232D. Cisco SPA232D 17 pages. Ip dect handset
Also for Cisco SPA232D: User Manual (10 pages)

Print Page

Note: The Cisco SPA232D assigns DECT Line1 as the default line

for outgoing calls from Cisco SPA302D handsets. If needed, you

can configure additional VoIP accounts as separate "DECT Lines."

To do so, choose the Voice menu, and then use the DECT Line

1~10 links in the navigation tree. Use the check boxes on the Quick

Setup page to associate the DECT Line(s) to each handset.

Click Submit to save your settings.

TEP

If you wish to change the PIN for handset registration, open the

TEP

Voice > System page, and then enter up to four digits in the IVR

Admin Password field. Click Submit to save your settings.

For more information, see the online Help or the administration guide.

(Documentation links are provided in

Registering a Cisco SPA302D Handset

You can register Cisco SPA302D handsets to the integrated DECT base

station. These handsets can be purchased separately.

On the Cisco SPA302D handset, press the center Select button on

TEP

the 4-way navigation keypad.

Select Register.

TEP

Using the navigation arrows, scroll to the Settings icon

TEP

and press the center navigation button to select it.

Select Handset Registration.

TEP

On the Cisco SPA232D, press the Page/Registration button and

TEP

hold it down for at least seven seconds until the green status light

flashes quickly.

TIP: If you press the button for fewer than seven seconds, the

green status light flashes slowly, indicating the unit is in "paging"

mode and is not in registration mode. Registration will not work if

the unit is in paging mode.

The default PIN is blank, so do not enter a PIN. Press the left

TEP

softkey to confirm that you want to register the handset. The

"registering" message appears.

Cisco SPA232D Quick Start Guide

Where to Go From Here, page

14.)