Ricoh Pro C9200 Operating Instructions Manual - Page 14
Browse online or download pdf Operating Instructions Manual for Printer Ricoh Pro C9200. Ricoh Pro C9200 24 pages. Using the auto color diagnosis function
Also for Ricoh Pro C9200: Operating Instructions Manual (48 pages), Tips (49 pages), Cip Training (16 pages), Manual (32 pages)
Print Page
1. Using the Auto Color Diagnosis Function
• The color mode of the job is set to 4-color (CMYK)
• Only one paper type is specified in the job
• If the number of colors used on each page differs, diagnostic marks are printed on the page that
has three or more color separations used for 4-color-printing. The diagnostic marks are not printed
if the page is in black and white.
• Diagnostic marks are superimposed on the printed image. Use the function on a job that you are
cutting off the marks afterward.
1.
Display the job properties in Fiery Command WorkStation, and select the [ACD color bar]
check box.
2.
View the preview image to check that the diagnostic marks do not overlap on the
finishing page.
In Fiery Command WorkStation, generate preview images by selecting [Process and Hold].
3.
Print the job.
The diagnostic marks are printed.
Print size and location of diagnostic marks
Two diagnostic marks of the same pattern are printed in the right and left margins.
12
M0B2WC0023