Ricoh Pro C9200 Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Drukarka Ricoh Pro C9200. Ricoh Pro C9200 24 stron. Using the auto color diagnosis function
Również dla Ricoh Pro C9200: Instrukcja obsługi (48 strony), Wskazówki (49 strony), Szkolenie Cip (16 strony), Podręcznik (32 strony)

Drukuj stronę

1. Using the Auto Color Diagnosis Function

• The color mode of the job is set to 4-color (CMYK)

• Only one paper type is specified in the job

• If the number of colors used on each page differs, diagnostic marks are printed on the page that

has three or more color separations used for 4-color-printing. The diagnostic marks are not printed

if the page is in black and white.

• Diagnostic marks are superimposed on the printed image. Use the function on a job that you are

cutting off the marks afterward.

Display the job properties in Fiery Command WorkStation, and select the [ACD color bar]

check box.

View the preview image to check that the diagnostic marks do not overlap on the

finishing page.

In Fiery Command WorkStation, generate preview images by selecting [Process and Hold].

Print the job.

The diagnostic marks are printed.

Print size and location of diagnostic marks

Two diagnostic marks of the same pattern are printed in the right and left margins.

M0B2WC0023