Cisco Unified 7912G Configuring Network Settings - Page 33

Browse online or download pdf Configuring Network Settings for IP Phone Cisco Unified 7912G. Cisco Unified 7912G 34 pages. Ip talk series
Also for Cisco Unified 7912G: User Manual (21 pages), User Manual (16 pages), User Manual (25 pages), Phone Manual (46 pages), Quick Reference (2 pages), At-A-Glance (20 pages), Reference Manual (20 pages), Install Manual (8 pages), Quick Reference (4 pages)

Print Page
Cisco Unified 7912G Configuring Network Settings
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Using the Phone Configuration Web Page
Step 1
Step 2
Step 3
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
For more information about CiscoWorks, refer to the documentation available at
this URL:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/index.htm
To configure CDP for the Cisco Unified IP Phone, follow these steps:
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
In the OpFlags field,
To enable CDP, change bit 6 to a zero (0).
a.
To disable CDP, change bit 6 to a 1.
b.
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to CDP Enabled.
If CDP is enabled, the option appears as
"Accessing Network Settings through a Phone
4-2.
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
Configuring CDP
4-33