Cisco Unified 7912G Ağ Ayarlarını Yapılandırma - Sayfa 33

IP Telefon Cisco Unified 7912G için çevrimiçi göz atın veya pdf Ağ Ayarlarını Yapılandırma indirin. Cisco Unified 7912G 34 sayfaları. Ip talk series
Ayrıca Cisco Unified 7912G için: Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Telefon Kılavuzu (46 sayfalar), Hızlı Referans (2 sayfalar), Bir Bakışta (20 sayfalar), Referans Kılavuzu (20 sayfalar), Kurulum Kılavuzu (8 sayfalar), Hızlı Referans (4 sayfalar)

Chapter 4

Configuring Network Settings on the Cisco Unified IP Phone

Using the Phone Configuration Web Page

Step 1

Step 2

Step 3

Using the Phone Network Configuration Screen

Step 1

Step 2

Step 3

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone

OL-8617-01

For more information about CiscoWorks, refer to the documentation available at

this URL:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/index.htm

To configure CDP for the Cisco Unified IP Phone, follow these steps:

Procedure

Display the Phone Configuration web page.

For instructions, see the

Configuration Web Page" section on page

In the pane on the left under Change Configuration, click Network Parameters.

You may be prompted to enter a password.

The Network Parameters web page appears.

In the OpFlags field,

To enable CDP, change bit 6 to a zero (0).

To disable CDP, change bit 6 to a 1.

Procedure

Display the Network Configuration menu.

For instructions, see the

on page

4-4.

Unlock Network Configuration menu options.

For instructions, see the

Configuration Menu" section on page

Scroll to CDP Enabled.

If CDP is enabled, the option appears as

"Accessing Network Settings through a Phone

4-2.

"Displaying the Network Configuration Menu" section

"Unlocking and Locking Options on the Network

4-5.

Configuring CDP

4-33