Cisco Unified 7912G Ağ Ayarlarını Yapılandırma - Sayfa 32

IP Telefon Cisco Unified 7912G için çevrimiçi göz atın veya pdf Ağ Ayarlarını Yapılandırma indirin. Cisco Unified 7912G 34 sayfaları. Ip talk series
Ayrıca Cisco Unified 7912G için: Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Telefon Kılavuzu (46 sayfalar), Hızlı Referans (2 sayfalar), Bir Bakışta (20 sayfalar), Referans Kılavuzu (20 sayfalar), Kurulum Kılavuzu (8 sayfalar), Hızlı Referans (4 sayfalar)

Configuring CDP

Assigning a Backup TFTP Server

Using the Phone Network Configuration Screen

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Configuring CDP

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone

4-32

TFTP Server 2 displays the IP address of the backup TFTP server. This server is

used to obtain configuration files and software upgrades if the primary TFTP

server is unavailable.

Before you can assign a backup TFTP server, the Alternate TFTP setting must

be set to Yes.

To assign a backup TFTP server, follow these steps:

Procedure

Display the Network Configuration menu.

For instructions, see the

on page

4-4.

Unlock Network Configuration menu options.

For instructions, see the

Configuration Menu" section on page

Scroll to TFTP Server 2.

Press the Edit softkey.

Enter the new Alternative TFTP Server address.

For information about entering values, see the

the Network Configuration Menu" section on page

Press the Validat softkey.

Press Save.

You can disable or enable Cisco Discovery Protocol (CDP). CDP allows the phone

to be discovered by the CiscoWorks network management system.

Chapter 4

Configuring Network Settings on the Cisco Unified IP Phone

"Displaying the Network Configuration Menu" section

"Unlocking and Locking Options on the Network

4-5.

"Guidelines for Editing Settings in

4-6.

OL-8617-01