Ricoh SP 311DNW Getting Started Manual - Page 10

Browse online or download pdf Getting Started Manual for Printer Ricoh SP 311DNW. Ricoh SP 311DNW 45 pages. Network settings guide
Also for Ricoh SP 311DNW: Quick Installation Manual (2 pages), Specifications (4 pages), Installation Manual (2 pages)

Print Page

Note:

Connection Succeeded: If the Power indicator lights up, the connection between the

•

printer and router was successful.

Connection Failed: If all indicators flash simultaneously, and after 30 seconds only the

•

Power indicator lights, the connection failed. Check that the router is

working properly and try again.

Important:

If you are configuring the printer again, for instance, you changed the device's location, use the

•

following method to reset the printer to factory defaults, and then repeat steps 1 - 2.

a. Turn printer power switch Off.

b. Press and hold [Job Reset] and [Stop/Start].

c. Turn printer power switch On.

d. When Alert indicator (middle light) starts flashing red, release keys.

e. Restart the printer; turn power switch Off, wait a moment, and then turn On.

3. Next, install Network Printer Driver and Utility. See

RICOH SP 311DNw B&W Network Laser Printer

3.2 Network Quick

Getting Started Guide

Install.