Ricoh SP 311DNW Getting Started Manual - Page 8

Browse online or download pdf Getting Started Manual for Printer Ricoh SP 311DNW. Ricoh SP 311DNW 45 pages. Network settings guide
Also for Ricoh SP 311DNW: Quick Installation Manual (2 pages), Specifications (4 pages), Installation Manual (2 pages)

Print Page

Connect Printer

STEP 2

This section explains how to connect the printer to your computer based on the

setup method you selected in

2.1 USB Connection

USB cable

directly connects the printer to your computer. Even if the computer that you are connecting is

networked, you can still connect the printer according to the procedures outlined below.

To make a USB connection, proceed as follows:

1. Turn printer power switch Off.

2. Insert USB cable (rectangular plug) firmly into computer's USB port.

3. Before inserting the USB cable (rectangular plug) into the computer's USB port,

install the USB Printer Driver and Utility. See

Note:

During software installation, you will be prompted to connect the USB cable (square plug) to your

•

printer, and turn the printer On.

2.2 Network Connection

Network connections include wired and wireless...

2.2.1 Wired (Ethernet) Connection

In a wired configuration, a network (Ethernet) cable connects the printer to your network hub (router) or

switch.

To make a wired connection, proceed as follows:

1. Confirm that printer's power switch is Off.

2. Plug network cable into printer's Ethernet port.

Important:

The printer cannot connect to a wired (Ethernet) network and wireless LAN network simultaneously.

•

3. Next, install the Network Printer Driver and Utility. See

RICOH SP 311DNw B&W Network Laser Printer

1.2 Choose Setup

Method.

3.1 USB Quick

Install.

3.2 Network Quick

Getting Started Guide

Install.