Ricoh SP C250DN Operating Instructions Manual - Page 18
Browse online or download pdf Operating Instructions Manual for Printer Ricoh SP C250DN. Ricoh SP C250DN 48 pages. Color laser printers
Also for Ricoh SP C250DN: Specifications (4 pages), Getting Started Manual (42 pages)
Print Page
2. Installing the Printer Driver
20.
Click [OK].
• The protocol is set to inactive as default. Enable the protocol on the control panel, using Web
Image Monitor or telnet.
Notes when using NetWare
Form Feed
Do not use NetWare to configure form feed. Form feed is controlled by the printer driver on
Windows. If NetWare form feed is configured, the printer may not print properly.
Follow the procedure below to disable form feed according to the operating system used:
• Clear the [Form feed] check box on the [NetWare Settings] tab in the printer properties dialog
box.
Banner Page
Do not use NetWare to configure banner page.
Follow the procedure below to disable banner page according to the operating system used:
• Clear the [Enable banner] check box on the [NetWare Settings] tab in the printer properties
dialog box.
When using the PostScript 3 Printer Driver
Follow the procedure below to set up the PostScript 3 printer driver.
1. On the [Start] menu, select [Printers and Faxes].
2. Right-click the printer's icon, and then click [Properties].
3. Click the [Device Settings] tab.
4. Select [No] on the [Send CTRL-D Before Each Job:] and [Send CTRL-D After Each Job:], and
then click [Apply].
5. Click [OK].
Printing after Resetting the Printer
Printer to print server connection requires 30–40 seconds to resume after the printer is reset. During
this period, jobs may be accepted (depending on NetWare specifications) but not printed.
To print after resetting the printer as the remote printer, check on the print server that the remote
printer is disconnected, or wait for two minutes before trying to print.
16