Ricoh SP C250DN Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Drukarka Ricoh SP C250DN. Ricoh SP C250DN 48 stron. Color laser printers
Również dla Ricoh SP C250DN: Specyfikacje (4 strony), Podręcznik dla początkujących (42 strony)

Drukuj stronę

2. Installing the Printer Driver

20.

Click [OK].

• The protocol is set to inactive as default. Enable the protocol on the control panel, using Web

Image Monitor or telnet.

Notes when using NetWare

Form Feed

Do not use NetWare to configure form feed. Form feed is controlled by the printer driver on

Windows. If NetWare form feed is configured, the printer may not print properly.

Follow the procedure below to disable form feed according to the operating system used:

• Clear the [Form feed] check box on the [NetWare Settings] tab in the printer properties dialog

box.

Banner Page

Do not use NetWare to configure banner page.

Follow the procedure below to disable banner page according to the operating system used:

• Clear the [Enable banner] check box on the [NetWare Settings] tab in the printer properties

dialog box.

When using the PostScript 3 Printer Driver

Follow the procedure below to set up the PostScript 3 printer driver.

1. On the [Start] menu, select [Printers and Faxes].

2. Right-click the printer's icon, and then click [Properties].

3. Click the [Device Settings] tab.

4. Select [No] on the [Send CTRL-D Before Each Job:] and [Send CTRL-D After Each Job:], and

then click [Apply].

5. Click [OK].

Printing after Resetting the Printer

Printer to print server connection requires 30–40 seconds to resume after the printer is reset. During

this period, jobs may be accepted (depending on NetWare specifications) but not printed.

To print after resetting the printer as the remote printer, check on the print server that the remote

printer is disconnected, or wait for two minutes before trying to print.