Cisco 12016 Unpacking Instructions Manual - Page 8
Browse online or download pdf Unpacking Instructions Manual for Network Router Cisco 12016. Cisco 12016 28 pages. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Also for Cisco 12016: Datasheet (9 pages), Instructions Manual (16 pages), Replacement Instructions Manual (32 pages), Replacement Instructions Manual (18 pages)
Print Page
Tools and Equipment
Tools and Equipment
Unpacking the Router
Opening and Disassembling the Shipping Package
Step 1
Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
8
You need the following tools and equipment to unpack the router:
•
A knife or scissors (to cut the packaging straps on the shipping container)
9/16-inch (14-mm) wrench (for chassis hold-down bolts and pallet hold-down
•
bracket bolts)
3/4-inch (19-mm) socket and ratchet wrench
•
•
Wire cutters
•
Safety hand truck with retractable safety leg wheels and security strap, such
as the Stevens Appliance Truck Company "Escort," Model STEV SRT-M-66
(distributed by McMaster-Carr as Model 2654T6), or an equivalent safety
hand truck.
Unpack the router in two phases:
Open and disassemble the shipping package to expose the router on the
•
shipping pallet
Remove the router and scissor-jack platform from the shipping pallet
•
These two procedures are described next.
To expose the router on the shipping pallet, use
and follow these steps:
Use a pallet jack or forklift to place the shipping container as close to the
installation location as possible. The unpacking site should be a large, open space
with a level, solid floor. The work space must be large enough to allow easy access
to all four sides of the shipping container.
Figure 1 on page 3
as a reference
78-16081-02