C4i HDV-E5100 User Manual - Page 5

Browse online or download pdf User Manual for Extender C4i HDV-E5100. C4i HDV-E5100 19 pages. Hdmi over ip extender with loop out 100m

Print Page
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity

5. Operation Controls and Functions

5.1 Encoder Panel

HDMI OUT
1
Number
1
HDMI OUT
2
HDMI IN
3
RESET button
4
CAT OUT
5
IR OUT
6
LINK LED
7
POWER LED
8
DC 5V
20~90% RH (non-condensing)
HDMI IN
RESET
2
Name
HDMI Loopout port, connect to HDMI display device
such as TV or monitor with an HDMI cable.
Connect to HDMI source device such as DVD player
or set-top box with an HDMI cable.
Reset the product, including IP address, encoding
information and EDID. The EDID will recover default
status for 1920*1080@60Hz
The CAT OUT port is connected CAT IN port in
Decoder or connected to switcher /
CAT cable for sending signal to
Notice: The CAT OUT is also a network port, it can
be connected directly PC (through corresponding
on-demand software such as VLC media player
software.) to output signal from HDMI IN port.
Connect to wideband IR blaster cable. The IR blaster
signal is from IR IN at the Decoder.
The LED will flash blue when Encoder is connected
Decoder or connected switcher /
The LED will illuminate blue when the Encoder is
powered on.
Plug the DC 5V/1A power supply into the unit and
connect the adapter to an AC outlet.
CAT OUT
3
4
Function description
3/17
IR OUT
DC 5V
5
6
7
8
router / hub with
Decoder.
router / hub.