C4i HDV-E5100 User Manual - Page 6

Browse online or download pdf User Manual for Extender C4i HDV-E5100. C4i HDV-E5100 19 pages. Hdmi over ip extender with loop out 100m

Print Page

5.2 Decoder Panel

HDMI OUT
1
Number
1
HDMI OUT
2
RESET button
3
CAT IN
4
IR IN
5
LINK LED
6
POWER LED
DC 5V
7
RESET
Name
Connect to HDMI display device such as TV or
monitor with an HDMI cable.
▪ Press the button briefly to reset the product, including
IP address, encoding information and EDID. The
EDID will recover default status for 1920*1080@60Hz.
▪ Press the button up to 3 seconds to copy EDID
from Decoder display device to Encoder's HDMI
source device.
The CAT IN port is connected CAT OUT port at the
Encoder or connected switcher /
CAT cable for receiving Encoder signal.
Connect to wideband IR receiver cable. The IR signal
is sent to IR OUT port at the Encoder.
The LED will flash blue when Decoder is connected
Encoder or connected switcher /
The LED will illuminate blue when the Decoder is
powered on.
Plug the DC 5V/1A power supply into the unit and
connect the adapter to an AC outlet.
CAT IN
3
2
Function description
4/17
IR IN
DC 5V
4
5
6
7
router / hub with
router / hub.