Cisco XR 12416 Repacking Manual - Page 22

Browse online or download pdf Repacking Manual for Network Router Cisco XR 12416. Cisco XR 12416 26 pages. Cisco systems router owner's manual
Also for Cisco XR 12416: Installation Manual (41 pages)

Print Page

Repackaging the Routers

Repackaging the Miscellaneous Accessories

Step 1

Step 2

Step 3

Reassembling the Accessories Package

Step 1

Step 2

Step 3

Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide

A-22

To repackage the all of the miscellaneous accessory pieces, follow these steps:

Put the box containing the front cover for the power shelf and upper blower

module into the large miscellaneous accessories box.

Put all of the other miscellaneous accessory pieces in the box.

Close and seal the carton.

Figure A-2

shows an exploded view of the pieces that make up the accessories

package for the router. To reassemble the accessory box package, use

on page A-5

as a reference and follow these steps:

Place the bottom accessories package cap open side up on the floor.

To insert the accessory boxes into their slots in the bottom cap, follow these steps:

Insert the box containing the center-mount rack-mounting brackets in the

center slot closest to the back panel of the router.

Set the box containing the rack-mounting platform against the box containing

the center-mount rack-mounting brackets.

Insert one vertical cable-management trough box on either side of the box

containing the rack-mounting platform.

Place the miscellaneous accessories box on top of the rack-mounting

platform box, between the two trough boxes.

Place the top accessories package cap over the ends of the accessories boxes and

push it down to hold all the boxes together.

Appendix A

Repackaging the Router

Figure A-2

OL-17440-01