DigitaLinx DL-S41 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Switch DigitaLinx DL-S41. DigitaLinx DL-S41 8 pages.

Print Page

Source Button Control

Manual Switching:

When the DL-S41 is in manual switching mode, the Source Mode LED will be
green. To advance to the next input, press the Source/Auto button.

Automatic Switching:

To enable automatic switching, press the Source/Auto button for three
seconds. The Source Mode LED will change to yellow.
When in auto-switch mode, the DL-S41 will switch according to the
following rules:
New Input: Upon detecting a new input, the switcher will automatically
select the new input.
Reboot: Once power is restored to the switcher, Input 1 will automatically
be selected as the current source even if an active source is on another
input.
Source Removed: When an active source is removed, the DL-S41 will switch
to the first available active input starting at HDMI Input 1.