DigitaLinx DL-S41 Kurulum Kılavuzu - Sayfa 4

Anahtar DigitaLinx DL-S41 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DigitaLinx DL-S41 8 sayfaları.

Source Button Control

When the DL-S41 is in manual switching mode, the Source Mode LED will be

green. To advance to the next input, press the Source/Auto button.

To enable automatic switching, press the Source/Auto button for three

seconds. The Source Mode LED will change to yellow.

When in auto-switch mode, the DL-S41 will switch according to the

following rules:

New Input: Upon detecting a new input, the switcher will automatically

select the new input.

Reboot: Once power is restored to the switcher, Input 1 will automatically

be selected as the current source even if an active source is on another

input.

Source Removed: When an active source is removed, the DL-S41 will switch

to the first available active input starting at HDMI Input 1.