Argina CM+ Installation Instructions Manual - Page 16

Browse online or download pdf Installation Instructions Manual for Control Unit Argina CM+. Argina CM+ 20 pages. Conventional fire alarm control panel

Print Page

13.6 User Code (Function 6)

The user code has to be entered to access the functions in access level 2.

These functions are: sirens on/off, reset, O/I, Test, day/night.

The User Code has 3 digits (001 to 999). The 0 digit is entered using key 10.

Entering 000 disables the User Code, which means that level 2 functions are then freely

accessible (to enter the code 000, press key 10 3 times).

Select Function 6 to change the code (see

After the function is selected, the Zone 1 Fault LED flashes. Enter the first digit of the code using

the desired zone key. Zone keys 1 to 9 correspond to the digits 1 to 9, and key 10 has the value

0 (for example Zone key 4 = first digit of the code is 4)

After this digit is entered, the Zone 2 Fault LED comes on and the second digit is entered. The

Zone 3 Fault LED then comes on for entering the third digit. The function closes automatically

when the third digit is entered.

13.7 Installer Code (Function 7)

The Installer Code has to be entered when configuring the operating panel.

The Installer Code has 3 digits (001 to 999). The 0 digit is entered using key 10.

Entering 000 disables the Installer Code, which means that the configuration menu is then freely

accessible.

Select Function 7 to change the code (see

The new code is entered in the same way as a new User Code.

14 Standard settings

System

T1 : 1 min

T2 : 5 min

T3 : Does not stop

Zones

Present.

Out of use

Delayed alarm

Double alarm test

Test position

Selecting the desired

function).

Z10