Argina CM+ Installationsanleitung Handbuch - Seite 16
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Kontrolleinheit Argina CM+ herunter. Argina CM+ 20 Seiten. Conventional fire alarm control panel
Seite drucken13.6 User Code (Function 6)
The user code has to be entered to access the functions in access level 2.
These functions are: sirens on/off, reset, O/I, Test, day/night.
The User Code has 3 digits (001 to 999). The 0 digit is entered using key 10.
Entering 000 disables the User Code, which means that level 2 functions are then freely
accessible (to enter the code 000, press key 10 3 times).
Select Function 6 to change the code (see
After the function is selected, the Zone 1 Fault LED flashes. Enter the first digit of the code using
the desired zone key. Zone keys 1 to 9 correspond to the digits 1 to 9, and key 10 has the value
0 (for example Zone key 4 = first digit of the code is 4)
After this digit is entered, the Zone 2 Fault LED comes on and the second digit is entered. The
Zone 3 Fault LED then comes on for entering the third digit. The function closes automatically
when the third digit is entered.
13.7 Installer Code (Function 7)
The Installer Code has to be entered when configuring the operating panel.
The Installer Code has 3 digits (001 to 999). The 0 digit is entered using key 10.
Entering 000 disables the Installer Code, which means that the configuration menu is then freely
accessible.
Select Function 7 to change the code (see
The new code is entered in the same way as a new User Code.
14 Standard settings
System
T1 : 1 min
T2 : 5 min
T3 : Does not stop
Zones
Present.
Out of use
Delayed alarm
Double alarm test
Test position
Z1
Z2
Z3
Z4
X
X
X
X
X
X
X
X
Selecting the desired
Selecting the desired
Z5
Z6
Z7
Z8
X
X
X
X
X
X
function).
function).
Z9
Z10
X
X