Cisco Catalyst IW6300 Series Installing Manual - Page 4
Browse online or download pdf Installing Manual for Wireless Access Point Cisco Catalyst IW6300 Series. Cisco Catalyst IW6300 Series 28 pages. Product document of compliance
Also for Cisco Catalyst IW6300 Series: Getting Started (20 pages)
Print Page
Mounting the Access Point on a Wall
Materials Required
Electric drill and standard screwdriver
#6-AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
13-mm box-end wrench or socket set
Caution
The mounting surface, attaching screws, and optional wall anchors must be able to support a 50-lb(22.7 kg)
static weight.
The mounting bracket can be used as a template to mark the screw hole locations. To mount the access point
on a vertical wall, follow these instructions:
Procedure
Step 1
Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. You can
optionally use the individual mounting holes or the mounting slots.
Figure 3: Mounting Bracket Dimension
Installing the Access Point
4
Installing the Access Point
In
Kit
No
No
No
No
No
No