Cisco Catalyst IW6300 Series Manual de instalação - Página 4
Procurar online ou descarregar pdf Manual de instalação para Ponto de acesso sem fios Cisco Catalyst IW6300 Series. Cisco Catalyst IW6300 Series 28 páginas. Product document of compliance
Também para Cisco Catalyst IW6300 Series: Começar a trabalhar (20 páginas)
Imprimir página
Mounting the Access Point on a Wall
Materials Required
Electric drill and standard screwdriver
#6-AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
13-mm box-end wrench or socket set
Caution
The mounting surface, attaching screws, and optional wall anchors must be able to support a 50-lb(22.7 kg)
static weight.
The mounting bracket can be used as a template to mark the screw hole locations. To mount the access point
on a vertical wall, follow these instructions:
Procedure
Step 1
Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. You can
optionally use the individual mounting holes or the mounting slots.
Figure 3: Mounting Bracket Dimension
Installing the Access Point
4
Installing the Access Point
In
Kit
No
No
No
No
No
No