Cisco Small Business WAP561 Quick Start Quide - Page 6
Browse online or download pdf Quick Start Quide for Wireless Access Point Cisco Small Business WAP561. Cisco Small Business WAP561 13 pages. Reboot and reset to factory default settings
Also for Cisco Small Business WAP561: Datasheet (8 pages), Review (6 pages), Brochure & Specs (4 pages), Quick Start Manual (13 pages), Manual (4 pages)
Print Page
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Power
Off
Solid Green
Flashing Green
Solid Red
Off
WLAN
Solid Green
Solid Amber
Solid Blue
Flashing
Off
LAN
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Small Business
N
OTE
Support Community at www.cisco.com/go/smallbizsupport.
6
Description
The device has no power.
The device is powered on. Normal operation.
Upgrading firmware or acquiring an IPv4
address.
Booting or firmware upgrade failed.
Wireless is disabled, for both Radio 1 and
Radio 2 wireless networks
Wireless Radio 1 is in use.
Wireless Radio 2 is in use.
(WAP561 only) Wireless Radios 1 and 2 are
operating in concurrent mode.
Transmitting or receiving data.
No Ethernet link.
GE Ethernet link is active.
FE Ethernet link is active.
Transmitting or receiving data.
Cisco Small Business WAP500 Series Wireless Access Point