Cisco Small Business WAP561 Quick Start Quide - Page 7
Browse online or download pdf Quick Start Quide for Wireless Access Point Cisco Small Business WAP561. Cisco Small Business WAP561 13 pages. Reboot and reset to factory default settings
Also for Cisco Small Business WAP561: Datasheet (8 pages), Review (6 pages), Brochure & Specs (4 pages), Quick Start Manual (13 pages), Manual (4 pages)
Print Page
Getting Started with the Configuration
6
To configure the wireless access points, follow these steps to access the
Wizard and then the web-based configuration utility from your computer.
Connect the wireless access point to the same network (IP subnet)
S
1
TEP
as your computer. The factory default IP address configuration of
the access points is DHCP. Make sure your DHCP server is running
and can be reached.
See
"Incorrect IP Address" on page 9
information, or if you do not have a DHCP server.
Locate the IP address of the wireless access point.
S
2
TEP
a.
The wireless access points can be accessed and managed by
Cisco Small Business network tools and services including the
Cisco FindIT Network Discovery Utility that enables you to
automatically discover all supported Cisco Small Business
devices in the same local network segment as your computer.
You can get a snapshot view of each device or launch the
product configuration utility to view and configure the settings.
For more information, see www.cisco.com/go/findit.
b. The wireless access points are Bonjour-enabled and
automatically broadcast their services and listen for services
being advertised by other Bonjour-enabled devices. If you
have a Bonjour-enabled browser, such as Microsoft Internet
Explorer with a Bonjour plug-in, or the Apple Mac Safari
browser, you can find the wireless access point on your local
network without knowing its IP address.
You can download the complete Bonjour for Internet Explorer
browser from Apple's Web site by visiting
http://www.apple.com/bonjour/.
c.
Locate the IP address assigned by your DHCP server by
accessing your router/DHCP Server; see your DHCP server
instructions for information.
Launch a web browser, such as Internet Explorer or Mozilla Firefox.
S
3
TEP
In the Address field enter the default DHCP address and press the
S
4
TEP
Enter key.
Enter the default user name of cisco and password of cisco in the
S
5
TEP
User Name and Password fields.
Click Login. The Wireless Access Point Setup Wizard appears.
S
6
TEP
Cisco Small Business WAP500 Series Wireless Access Point
for troubleshooting
7