Cisco 500 Series Manual - Page 26

Browse online or download pdf Manual for Conference System Cisco 500 Series. Cisco 500 Series 40 pages. Stackable managed switches
Also for Cisco 500 Series: Safety Information Manual (42 pages), Manual (4 pages), Quick Start Quide (13 pages), Quick Start Manual (21 pages), Datasheet (5 pages), User Manual (4 pages), User Manual (6 pages), User Manual (46 pages), Administration Manual (48 pages), Manual (24 pages), Troubleshooting And Maintenance (15 pages), Quick Reference Manual (7 pages), Quick Start Manual (25 pages)

Print Page

Restart the Cisco TFTP Server

Step 5

Click Close.

Restart the Cisco TFTP Server

After you upload the defaultheadsetconfig.json file to the TFTP directory, restart the Cisco TFTP

server and reset the phones. After about 10–15 minutes, the download process begins and the new configurations

are applied to the headsets. It takes an additional 10 to 30 minutes for the settings to be applied.

Procedure

Step 1

Step 2

From the Server drop-down list box, choose the server on which the Cisco TFTP service is running.

Step 3

Click the radio button that corresponds to the Cisco TFTP service.

Step 4

Click Restart.

Connect a Headset to Your Phone

Each type of wired headset, adapter, or base connects to a phone using a different port and a different type of

connector and cable. Common types include an RJ connector, a USB connector, and a Y-cable.

Connect a Standard Headset

You can use a standard headset with your desk phone. Standard headsets plug into the headset jack on the

back of the phone with an RJ-type connecter.

Figure 13: Standard Headset Connection

Caution

Failure to press the cable into the channel in the phone can damage the printed circuit board inside the phone.

The cable channel reduces the strain on the connector and the printed circuit board.

Headsets