Cisco MCS 7800 Series Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Conference System Cisco MCS 7800 Series. Cisco MCS 7800 Series 2 pages. Multiplatform phones
Also for Cisco MCS 7800 Series: Quick Start Manual (12 pages), Quick Start Manual (2 pages), End User Manual (6 pages), Quick Start Manual (2 pages), Quick Reference (2 pages), Firmware Migration Master Manual (31 pages), Manual (43 pages), Manual (4 pages), Get Started (6 pages), Installation Manual (39 pages), Manual (20 pages), Quick Start Manual (2 pages)

Print Page
Cisco MCS 7800 Series Quick Start Manual
Place a call with a headset
1. Plug in a headset.
2. Enter a number using the keypad.
3. Press Headset
.
Place a call with the speakerphone
1. Enter a number using the keypad.
2. Press Speakerphone
.
Mute your audio
1. Press Mute
.
2. Press Mute again to turn mute off.
Listen to voice messages
Press Messages
and follow the voice prompts.
***TEMPORARY VOICEMAIL PASSCODE IS 189291#.
CHOOSE A NEW PASSCODE 4-16 DIGITS LONG, must
not contain your extension in any form and will not
accept anything simple like 1111 or 1234.
To check messages for a specific line, press the
line button first.
Forward all calls
1. Press the Forward softkey.
2. Dial the number that you want to forward to
and press the Call softkey.
3. 3. When you return, press the Clr softkey.
Link to Video Tutorial-
https://s3.amazonaws.com/smartlynk-cincibell/courses/CBTS_Cisco_7821-7841-7861_Phone_Tutorial_10.22.18/story_html5.html
cbts.com
009180730
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
Adjust the volume in a call
Press Volume
up or down to adjust the
handset, headset, or speakerphone volume when the
phone is in use.
Adjust the ringtone volume
Press Volume
up or down to adjust the
ringer volume when the phone is not in use.

Change ringtone

1. Press Applications
.
2. Select User preferences > Audio preferences >
Ext (n) - Ring tone, where n = extension number.
3. Scroll through the list of ringtones and press
Play to hear a sample.
4. Press Select and Set to save a selection.
5. Press Back to exit.
Adjust the screen contrast
1. Press Applications
.
2. Select User preferences > Screen preferences >
Contrast level.
3. Press up to increase, or down to decrease, the
contrast.
4. Press Save.
Adjust the screen backlight
(7821, 7841, 7861)
1. Press Applications
.
2. Select User preferences > Screen preferences >
Backlight timer.
3. Press On or Off, or select a length of time for the
backlight to be on.
User Guide
View the full User Guide at https://www.cisco.com/c/
en/us/support/collaboration-endpoints/unified-ip-
phone-7800-series/products-user-guide-list.html
2