Cisco MCU 5300 series Installation Manual - Page 5

Browse online or download pdf Installation Manual for Conference System Cisco MCU 5300 series. Cisco MCU 5300 series 14 pages. Telepresence

Print Page

Connecting the MCU 53x0

Connecting the MCU 53x0

Before you start

IMPORTANT: Before installing the MCU 53x0, you must read the safety information at
http://www.cisco.com/go/telepresence/safety.

Task 1: Connect power

Connect the power connector on the rear of the unit to the power supply using the supplied power cable.
(There is no On/Off switch.)

Task 2: Connect to Ethernet Port A

Connect an Ethernet cable from Ethernet Port A to an Ethernet switch.
Failing to configure both sides of the Ethernet connection in the same way can result in packet loss,
i
leading to poor audio and video quality.
Only connect to Ethernet Port B if you need to connect the MCU to a second subnet.
Cisco TelePresence MCU 5300 Series Installation Guide
Page 5 of 14