Cisco MCU 5300 series Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Конференц-система Cisco MCU 5300 series. Cisco MCU 5300 series 14 сторінок. Telepresence

Друкувати сторінку

Connecting the MCU 53x0

Connecting the MCU 53x0

Before you start

IMPORTANT: Before installing the MCU 53x0, you must read the safety information at
http://www.cisco.com/go/telepresence/safety.

Task 1: Connect power

Connect the power connector on the rear of the unit to the power supply using the supplied power cable.
(There is no On/Off switch.)

Task 2: Connect to Ethernet Port A

Connect an Ethernet cable from Ethernet Port A to an Ethernet switch.
Failing to configure both sides of the Ethernet connection in the same way can result in packet loss,
i
leading to poor audio and video quality.
Only connect to Ethernet Port B if you need to connect the MCU to a second subnet.
Cisco TelePresence MCU 5300 Series Installation Guide
Page 5 of 14