Cisco TelePresence SpeakerTrack 60 Camera Manual - Page 16

Browse online or download pdf Camera Manual for Conference System Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 pages. Telepresence
Also for Cisco TelePresence SpeakerTrack 60: Datasheet (3 pages), Installation Manual (19 pages), Installation Manual (14 pages), Manual (22 pages), Camera Manual (44 pages)

Print Page
Cisco TelePresence SpeakerTrack 60 Camera Manual
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents

Connect Precision 60 to Codec Pro

•
Connect the video cable (HDMI) between the camera and codec.
Codec: Always use Connector 1 (HDMI input) for the main camera.
Camera: Connect to the HDMI output.
•
If you use a coaxial cable for video, you will need a BNC to
HD-BNC cable or a BNC to HD-BNC adapter to connect the
Precision 60 (BNC) to the Codec Pro (HD-BNC).
•
Connect the camera control cable (Ethernet) between the camera
control ports on the camera and codec.
Codec: The connector is marked with the camera control symbol.
Camera: Connect to the Ethernet port.
•
Connect the power adapter to the camera and connect to power.
•
Connect other codec cables as described in
Room Kit Pro Precision 60 installation
HDMI
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco Webex
guide.
Connecting to a codec
Connecting to a codec
RJ45
Power
(100-240 V
, 50/60 Hz)
AC
16
Factory reset
Appendix
Power
adapter
Always use the provided power cable
and adapter.
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide