Cisco TelePresence SpeakerTrack 60 Camera Manual - Page 20
Browse online or download pdf Camera Manual for Conference System Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 pages. Telepresence
Also for Cisco TelePresence SpeakerTrack 60: Datasheet (3 pages), Installation Manual (19 pages), Installation Manual (14 pages), Manual (22 pages), Camera Manual (44 pages)
Print Page
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents
Connect SpeakerTrack 60 to SX80 Codec
•
Connect the video cables (HDMI).
Left camera: Connect between Connector 1 (HDMI input) on the
codec to the HDMI input of the left camera.
Right camera: Connect between Connector 2 (HDMI input) on the
codec to the HDMI input of the right camera.
•
Connect the camera control cable (Ethernet). Connect between
the codec's 2nd or 3rd Ethernet port to the Network port
(Ethernet) on the SpeakerTrack 60 connector panel.
•
Connect the power adapter to the SpeakerTrack 60 connector
panel and connect to power.
•
Connect other codec cables as described in
Telepresence SX80 installation
guide.
RJ45
HDMI 1
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco
HDMI 2
Power
(100-240 V
, 50/60 Hz)
AC
Connecting to a codec
Connecting to a codec
Right
Power
adapter
Always use the provided power cable
and adapter.
20
Factory reset
Appendix
Left
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide