Cisco TelePresence SpeakerTrack 60 Camera Manual - Page 31
Browse online or download pdf Camera Manual for Conference System Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 pages. Telepresence
Also for Cisco TelePresence SpeakerTrack 60: Datasheet (3 pages), Installation Manual (19 pages), Installation Manual (14 pages), Manual (22 pages), Camera Manual (44 pages)
Print Page
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents
Precision 60 Camera
A factory reset should only be performed by a system
administrator or in contact with Cisco technical support.
The camera will be reset to factory defaults, and all configu-
ration and logs will be erased.
It is not possible to undo a factory reset.
To perform a factory reset:
1. Locate the pinhole button at the back of the camera.
2. Use a pen or similar to press and hold the factory reset
button for 10 seconds.
3. The camera LED will be lit red during the factory reset.
Do not unplug power.
4. When the factory reset is complete, the camera restarts
and the camera LED lights up.
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
Connecting to a codec
Pinhole for
factory reset
31
Factory reset
Factory reset
Appendix
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide