Cisco TelePresence SX20 Reference Manual - Page 7

Browse online or download pdf Reference Manual for Conference System Cisco TelePresence SX20. Cisco TelePresence SX20 8 pages. In-room control on touch 10
Also for Cisco TelePresence SX20: Quick Set (8 pages), Getting Started Manual (41 pages), Getting Started Manual (42 pages), Quick Reference Manual (2 pages), Quick Set (2 pages), Quick Reference Manual (2 pages), User Manual (34 pages), User Manual (29 pages), Troubleshooting Manual (37 pages), Regulatory Compliance And Safety Information Manual (9 pages), Setup Manual (8 pages), User Manual (38 pages), Installation Manual (2 pages), User Manual (2 pages), Quick Reference Manual (2 pages), User Manual (37 pages), Manual (45 pages), Manual (45 pages), Installation Sheet (2 pages), Installation Manual (2 pages), User Manual (34 pages), User Manual (5 pages), User Manual (38 pages), User Manual (38 pages), Getting Started Manual (42 pages), Getting Started Manual (46 pages)

Print Page
Cisco TelePresence SX20 Reference Manual

Equipment Troubleshooting

The system doesn't work / won't power up
Ensure that the system is plugged into the power outlet.
•
•
Verify that the network cable is plugged into the appropriate port in the wall.
•
Check that the cables are securely plugged into the back of the codec.
If the problem persists, contact Ontario Health (OTN) at 1-855-654-0888 for technical support.
•
I cannot connect to a site
Ensure that all cables and plugs are securely plugged in.
•
Check that you have the correct site selection.
•
If the problem persists, contact Ontario Health (OTN) at 1-855-654-0888 for technical support.
•
I cannot hear the other site
Ensure that the other site has un-muted their microphone.
•
Verify that the other site has positioned their microphone correctly.
•
Check that your site has its volume turned up.
•
If the problem persists, contact Ontario Health (OTN) at 1-855-654-0888 for technical support.
•
I hear echoes when I am speaking to the remote site
Echoes are always caused by the far site in a call. Have the far site decrease the volume and make
sure that their microphones are placed away from the system and monitor speakers.
I cannot see the other site
•
Verify that your monitor is turned on and the privacy shutter is opened.
•
Make sure that the other site has their camera positioned correctly.
•
If the problem persists, contact Ontario Health (OTN) at 1-855-654-0888 for technical support.
My monitor is displaying black and white (no color)
Check that all cables and plugs are securely plugged in at the back of the codec.
The session was interrupted and connections lost
Keep system on, attempt to reconnect.
•
•
If the problem persists, contact Ontario Health (OTN) at 1-855-654-0888 for technical support.
My screen is dusty and has finger marks on it
Clean with a damp cloth after turning off the monitor.
•
To keep the system looking brand new, periodically clean it with a mild detergent solution.
•
Never use strong solvents such as thinner or benzene, or abrasive cleaners since they will damage
•
the cabinet.
•
As a safety precaution, unplug the system before cleaning it. Never attempt to sterilize this unit. If
the system must be used in a sterilized environment, use suitable protective covers.
March 2023 | pg. 7